Honda

Home / Honda

We Service and Repair all Honda cars

  • 2010 Honda Civic

    Honda Civic
    Mileage
    76,127
    Service Date
    9/30/2025
    Services Performed
    • SMOKE TEST SYSTEM AND PINPOINT LEAK AT HOSE COMING FROM TOP OF TANK. REMOVED TRUNK TRIM AND REAR SEAT TO GAIN ACCESS TO TOP OF TANK. REPAIR LEAKY HOSE
    • LOW TIRE PRESSURE LIGHT CAME ON THE SAME TIME OF CHECK ENGINE LIGHT. FIXED LOW TIRE PRESSURE AND CHECK ENGINE LIGHT STAYED ON
    • POWERSTEERING LEAK
    • REMOVE AND REPLACED LEAKING POWER STEERING PRESSURE HOSE, REFILLED THE POWER STEERING SYSTEM
     
    ROBERT S. gave our service a 5 star review on 9/30/2025
  • 2008 Honda Accord

    Honda Accord
    Mileage
    83,121
    Service Date
    8/22/2025
    Services Performed
    • Inspect Brakes- Customer states brakes are noisy Rear brakes are metal to metal. Front brakes have 50% remaining- Aok. Recommend rear brake pads and rotors.
    • REAR BRAKE JOB DISC REMOVE CALIPERS / RETRACT PISTONS, INSTALL NEW PADS, AND ROTORS CLEAN + LUBE CALIPER SLIDES, PINS, BUSHINGS. REASSEMBLE TORQUE LUG NUTS
     
    JERRY K. gave our service a 5 star review on 8/23/2025
  • 2007 Honda Odyssey

    Honda Odyssey
    Mileage
    185,489
    Service Date
    2/11/2025
    Services Performed
    • Rear signal light is dim- Check and advise Observed rapid clicking- inspection shows passenger front turn signal has bad ground causing rear signal to dim. Gain access and repair ground as needed. Verify operation of exterior lights.
    • Change oil & filter, check engine air filter (clean), check tire pressures, top off fluids, and general safety inspection.
    • Check spark plugs- removed spark plug to inspect appears to have been recently changed.
    • Remove wheels, clean mating surfaces, and rotate tires. Torque lug nuts to factory specifications.
    • (Passenger front) Tire pressure sensor failed. Dismount tire to replace sensor and relearn position. Newly replaced sensor is now positioned at rear driver.
    • RELEARN TIRE POSITION SENSOR- Tire pressure sensor failed replace sensor and relearn position. Newly replaced sensor is now positioned at rear driver.
    • LICENSE PLATE BULB (2) – Remove & Replace
    • Multiple test drives given to monitor driveability and brake function. Brake pads front and rear appear newer- brake are applying as they should.
    • Cleaned oil from motor to inspect- very minimal leak- Recheck at next oil change
     
    ENRIQUE JR. G. gave our service a 5 star review on 2/11/2025